1987 Mercedes-Benz 260E Wheels & Rims
Shop Wheels for 1987 Mercedes-Benz 260E
Showing 8 of 8+ wheels compatible with the 1987 Mercedes-Benz 260E
The 1987 Mercedes-Benz 260E Base trim rolls on a 5x112 bolt pattern with a 66.6mm center bore. Its factory 15x6.5 setup delivers classic Mercedes engineering, and we stock replacement wheels from Heritage Wheel, Aodhan, Motegi Racing, Work Wheels, Niche 1PC, Petrol, Rotiform 1PC, and MRR that fit perfectly. Every wheel is verified to bolt on before it ships.
Sizing up is easy with options ranging from 14-inch to 18-inch diameters, giving your 260E fresh style without compromise. Whether you prefer understated elegance or modern presence, we have the wheel for your vision. All orders qualify for free shipping to the lower 48 states.
1987 Mercedes-Benz 260E Wheel Fitment Guide — What Works & What to Avoid
Your 1987 Mercedes-Benz 260E uses a 5x112 bolt pattern with a stock setup of 15x6.5 wheels at a 30-millimeter offset. You can step up through fourteen, fifteen, sixteen, seventeen, or eighteen-inch sizes—ranging from 14x6 all the way to 18x7.5—giving you solid flexibility for styling without hunting down oddball fitments. Since the car runs square wheels, not staggered, you have the same width and offset freedom front and rear.
Watch for the 66.6-millimeter hub bore on the original wheels. If you choose an aftermarket wheel with a larger center bore, install hub-centric rings to keep everything seated properly and eliminate vibration. Because offset affects how far a wheel sits from the hub, going too aggressive—either extremely negative or positive—invites rubbing against fenders or suspension components, so verify your offset choice against your intended width before ordering.
We've verified every size above bolts directly to your 260E and ships free in the lower 48 states. Heritage Wheel, Aodhan, Motegi Racing, Work Wheels, Niche 1PC, Petrol, Rotiform 1PC, and MRR all carry fitments ready to go.
1987 Mercedes-Benz 260E Wheel Fitment Specifications
The 5x112 bolt pattern determines which wheels physically bolt onto your car, while the 66.6mm center bore ensures a hub-centric fit. The factory equips this car with 15x6.5 wheels at a +30 offset.
Lug Type
bolt
Thread Size
M12x1.5
Torque Spec
85 ft-lbs
TPMS
No
1987 Mercedes-Benz 260E Compatible Wheel Sizes
| Wheel Size | Offset Range | Compatible Tires | Notes |
|---|---|---|---|
| 14x6 | +25 to +38 | 195/65R14 | — |
| 15x6.5 | +25 to +30 | 195/65R15 | — |
| 15x7 | +25 to +38 | 205/65R15, 205/60R15, 205/55R15 | — |
| 16x7 | +25 to +38 | 205/55R16, 225/50R16 | — |
| 17x7 | +25 to +38 | 205/50R17, 225/45R17 | — |
| 16x7.5 | +25 to +35 | 205/55R16, 225/50R16 | — |
| 17x7.5 | +25 to +35 | 205/50R17, 225/45R17 | — |
| 18x7.5 | +25 to +35 | 225/40R18 | — |
| 16x8 | +25 to +30 | 225/55R16 | — |
| 17x8 | +25 to +33 | 205/50R17, 225/45R17 | 1. Check fitment, possible clearance issues |
| 18x8 | +25 to +33 | 225/40R18 | 1. Check fitment, possible clearance issues |
Best Wheel Brands for the Mercedes-Benz 260E
- BBS — LM, RS, FI, CI-R
- Volk Racing — TE37, ZE40
- Work Wheels — Meister, Emotion
- TSW — Bathurst, Nurburgring
- Rotiform — FLG, OZR, BUC
- Enkei — RPF1, TS-V
Complete Your 1987 Mercedes-Benz 260E Build
- Mercedes-Benz 260E coilovers — pairs well with a wheel upgrade
- Mercedes-Benz 260E exhaust systems — pairs well with a wheel upgrade
- Mercedes-Benz 260E suspension — pairs well with a wheel upgrade
- Mercedes-Benz 260E brakes — pairs well with a wheel upgrade
- Wheel & tire packages — pre-mounted, balanced, shipped ready to bolt on
- Installation accessories — hub rings, extended studs, TPMS kits, spacers