1988 Lamborghini Countach Wheels & Rims
Shop Wheels for 1988 Lamborghini Countach
Showing 8 of 8+ wheels compatible with the 1988 Lamborghini Countach
The 1988 Lamborghini Countach 5000 quattrovalvole rides on a 5x120 bolt pattern with a seventy point three millimeter center bore. Factory fitment pairs a fifteen by seven front wheel with a fifteen by twelve rear, delivering the staggered setup that defines this supercar's stance. ThreePiece.us stocks wheels from Heritage Wheel, Work Wheels, OHM, Aodhan, Petrol, KATANA RACING, Niche 1PC, and Enkei—all verified to bolt on correctly and shipped free to the lower forty-eight states.
Whether you're chasing classic style or modern performance, compatible sizes range from fourteen by seven point five through fifteen by thirteen. Every wheel in our inventory is hand-checked to ensure proper fitment on your Countach before it ships. Browse our selection knowing that your upgrade arrives ready to install, with free shipping included on all orders within the continental United States.
1988 Lamborghini Countach Wheel Fitment Guide — What Works & What to Avoid
Your 1988 Lamborghini Countach 5000 quattrovalvole uses a five-lug 120-millimeter bolt pattern with a 70.3-millimeter hub-centric bore. The stock setup runs fifteen-inch wheels, seven inches wide up front with a twenty-eight millimeter offset, and twelve inches wide at the rear with a three millimeter offset. You can step down to fourteen-inch diameters or go wider in fifteen-inch fitments, choosing from sizes like fifteen by eleven or fifteen by thirteen depending on your stance preference.
Any wheel you select must match the 5x120 bolt pattern—nothing else will fit this Countach. Because your vehicle is hub-centric, use hub-centric rings if you pick a wheel with a bore larger than 70.3 millimeters. The staggered nature of this car means aggressive offset choices or extreme widths can invite fender and suspension contact, so verify your specific size and offset combo before purchasing.
All wheels listed here bolt directly onto your car and qualify for free shipping in the lower forty-eight states. Heritage Wheel, Work Wheels, OHM, and several other quality brands in our inventory are ready to ship for your Countach.
1988 Lamborghini Countach Wheel Fitment Specifications
The 5x120 bolt pattern determines which wheels physically bolt onto your vehicle, while the 70.3mm center bore ensures a hub-centric fit. This vehicle runs a factory staggered setup: 15x7 +28 front and 15x12 +3 rear.
Lug Type
bolt
Thread Size
M12x1.5
Torque Spec
85 ft-lbs
TPMS
No
1988 Lamborghini Countach Compatible Wheel Sizes — Rear Axle
| Wheel Size | Offset Range | Compatible Tires | Notes |
|---|---|---|---|
| 15x11 | -5 to +3 | 345/35R15 | — |
| 15x12 | +null to +3 | 345/35R15 | — |
| 15x13 | +null to +3 | 345/35R15 | — |
| 14x9.5 | +null to +3 | 215/70R14 | — |
Best Wheel Brands for the Lamborghini Countach
Complete Your 1988 Lamborghini Countach Build
- Lamborghini Countach suspension — pairs well with a wheel upgrade
- Lamborghini Countach brakes — pairs well with a wheel upgrade
- Wheel & tire packages — pre-mounted, balanced, shipped ready to bolt on
- Installation accessories — hub rings, extended studs, TPMS kits, spacers