1987 Ferrari GTO Wheels & Rims
Shop Wheels for 1987 Ferrari GTO
Showing 8 of 8+ wheels compatible with the 1987 Ferrari GTO
The 1987 Ferrari GTO Base comes equipped with staggered wheels—16x8 up front and 16x10 out back—both wearing a 19 and 22 offset respectively on a 5x108 bolt pattern. Finding the right replacement or upgrade has never been easier, as ThreePiece.us stocks premium options from Heritage Wheel, Petrol, Asanti Black, fifteen52, Work Wheels, Niche 1PC, Motegi Racing, and Mazzi. Every wheel we offer is verified to bolt on perfectly.
Whether you're seeking to restore originality or pursue a fresh look, compatible sizes in both 16x8 and 16x10 accommodate your GTO's distinctive staggered setup. Browse our curated selection knowing that fitment is guaranteed and shipping arrives free throughout the lower 48 states. Your Ferrari deserves the perfect rolling stock.
1987 Ferrari GTO Wheel Fitment Guide — What Works & What to Avoid
Your 1987 Ferrari GTO uses a five-lug, 108mm bolt pattern that accepts both 16-inch widths. The front wheels measure 16 by 8 inches with a 19mm offset, while the rear runs staggered at 16 by 10 inches with a 22mm offset. This staggered setup is original to the car, and you'll find compatible options in both widths from quality manufacturers.
Pay close attention to the 67.1mm hub-centric bore on this Ferrari. Any aftermarket wheel with a larger center bore will require hub-centric rings to seat properly and avoid vibration. The five-by-108 bolt pattern is specific to this application—no other pattern will fit. Since this car sits low and tight, aggressive offsets beyond the stock range risk contact with fenders or suspension components, so stick within tested parameters.
Every wheel we stock for your GTO bolts on correctly and ships free across the lower 48 states. Brands like Heritage Wheel, Petrol, Work Wheels, and fifteen52 all have proven fitments ready to ship.
1987 Ferrari GTO Wheel Fitment Specifications
The 5x108 bolt pattern determines which wheels physically bolt onto your vehicle, while the 67.1mm center bore ensures a hub-centric fit. This vehicle runs a factory staggered setup: 16x8 +19 front and 16x10 +22 rear.
Lug Type
nut
Thread Size
M14x1.5
Torque Spec
89 ft-lbs
TPMS
No
1987 Ferrari GTO Compatible Wheel Sizes — Rear Axle
| Wheel Size | Offset Range | Compatible Tires | Notes |
|---|---|---|---|
| 16x10 | +15 to +25 | 265/50R16 | — |
Best Wheel Brands for the Ferrari GTO
Complete Your 1987 Ferrari GTO Build
- Ferrari GTO suspension — pairs well with a wheel upgrade
- Ferrari GTO brakes — pairs well with a wheel upgrade
- Wheel & tire packages — pre-mounted, balanced, shipped ready to bolt on
- Installation accessories — hub rings, extended studs, TPMS kits, spacers








