1980 Toyota Corona Wheels & Rims
Shop Wheels for 1980 Toyota Corona
Talk to a Toyota Fitment Expert
Not sure which wheels to run on your 1980 Toyota Corona? Our team has helped thousands of Toyota owners dial in the perfect setup. Free advice, no pressure — just call or email.
The 1980 Toyota Corona is popular in the JDM and sport compact community. Whether you're building a weekend show car, a daily-driven street setup, or a purpose-built track machine, upgrading your wheels is the single biggest visual and performance improvement you can make. At ThreePiece, we carry thousands of aftermarket wheels that are verified to bolt directly onto your 1980 Toyota Corona — no guesswork, no adapters, no fitment surprises.
Every wheel we sell for the Corona has been cross-referenced against the factory 4x114.3 bolt pattern and 60.1mm hub bore. The stock wheel is a 14x5, but owners commonly upgrade to larger diameters for improved aesthetics and handling. All orders ship free within the continental US, and our fitment team is available by phone to walk you through every option.
1980 Toyota Corona Trim Levels
The 1980 Toyota Corona was offered in 2 trims. The bolt pattern, center bore, and lug specifications are shared across all trims — differences are primarily in stock wheel diameter and offset. The fitment data below covers all variants.
1980 Toyota Corona Wheel Fitment Specifications
These are the critical numbers you need when shopping for aftermarket wheels for the 1980 Toyota Corona. The 4x114.3 bolt pattern determines which wheels physically bolt onto your car, while the 60.1mm center bore ensures a hub-centric fit. The factory equips this car with 14x5 wheels at a +40 offset.
1980 Toyota Corona Compatible Wheel Sizes
Every wheel size in this table has been verified as compatible with the 1980 Toyota Corona. The table includes both OEM-equivalent replacement sizes and popular plus-size upgrades. When upsizing, remember that a lower-profile tire is needed to maintain the same overall diameter and keep your speedometer accurate.
| Wheel Size | Offset Range | Compatible Tires | Notes |
|---|---|---|---|
| 14x5 | +35 to +40 | 175/80R14 | — |
| 14x6 | +35 to +40 | 195/70R14, 205/65R14 | — |
| 15x6 | +35 to +40 | 205/60R15, 195/65R15 | — |
| 15x6.5 | +35 to +40 | 205/60R15, 195/65R15 | — |
| 15x7 | +35 to +40 | 205/60R15, 195/65R15 | — |
Best Wheel Brands for the Toyota Corona
The Toyota Corona is popular in the JDM and sport compact community. Based on what we see our customers running and what the community gravitates toward, here are the brands we recommend for the Corona:
- Work Wheels — Meister, Emotion, Equip, CR Kiwami
- Volk Racing — TE37, CE28, ZE40
- SSR — Professor, Formula, GTX
- Gram Lights — 57CR, 57DR, 57Xtreme
- Enkei — RPF1, NT03, PF01
- Aodhan — DS02, AH02, AFF7
- WedsSport — SA-72R, TC105X
Don't see the brand you're looking for? Browse all brands or call us — we can source wheels from virtually any manufacturer.
Complete Your 1980 Toyota Corona Build
Wheels are just the beginning. Many Corona owners pair their wheel upgrade with performance modifications to get the most out of their car. Here are some popular upgrades that complement a new set of wheels:
- Toyota Corona coilovers — often paired with a wheel upgrade for a complete transformation
- Toyota Corona exhaust systems — often paired with a wheel upgrade for a complete transformation
- Toyota Corona suspension — often paired with a wheel upgrade for a complete transformation
- Toyota Corona brakes — often paired with a wheel upgrade for a complete transformation
- Wheel & tire packages — save time and money with a pre-mounted, balanced package shipped ready to bolt on
- Installation accessories — hub-centric rings, extended lug studs, TPMS rebuild kits, wheel spacers
Understanding 1980 Toyota Corona Wheel Fitment
Getting the right wheel fitment on your 1980 Toyota Corona comes down to four critical measurements:
Bolt Pattern: 4x114.3
The bolt pattern (also called PCD) is the most fundamental fitment spec — it determines which wheels will physically bolt onto your car. The 1980 Toyota Corona uses a 4x114.3 pattern, which is shared with many other Toyota models and is one of the most common bolt patterns in the JDM world. This means you have a massive selection of aftermarket wheels to choose from.
Center Bore: 60.1mm
The center bore is the hole in the middle of the wheel that sits over your hub. The 1980 Toyota Corona has a 60.1mm center bore. If your aftermarket wheels have a larger bore (which is common), you'll need hub-centric rings to eliminate vibration at highway speeds. We include the correct hub rings with every wheel and tire package.
Offset & Width
Offset determines how far the wheel sits inward or outward relative to the hub face. A lower offset pushes the wheel outward for a more aggressive, flush look. A higher offset tucks the wheel further under the fender for a conservative fitment. The factory offset of +40 is a good baseline — going 5-15mm lower will give you a more flush look.
Related Articles
Read more about the Toyota Corona and wheel fitment on our blog:
Ready to Upgrade Your 1980 Toyota Corona?
Browse our full catalog, get a wheel and tire package quote, or talk to a fitment expert.
Other Toyota Corona Years
Other Toyota Models
Frequently Asked Questions — 1980 Toyota Corona Wheels
What bolt pattern does a 1980 Toyota Corona have?
The 1980 Toyota Corona uses a 4x114.3 bolt pattern with a 60.1mm center bore. This is one of the most common patterns in the aftermarket, giving you access to thousands of wheel options.
What size wheels can I put on my 1980 Toyota Corona?
Compatible wheel sizes for the 1980 Toyota Corona range from 14x5 up to 15x7 on the front and rear. See the complete compatibility tables above for every confirmed size, offset range, and tire pairing.
Do you offer free shipping on 1980 Toyota Corona wheels?
Yes — every wheel and wheel & tire package ships free within the continental United States. We also offer professional mounting, balancing, and TPMS sensor installation on all packages.
What brands make wheels for the 1980 Toyota Corona?
We carry wheels from Work Wheels, Volk Racing, SSR, Gram Lights, and many more. Browse all brands or call us for a personalized recommendation.