2012 Nissan GT-R Wheels & Rims
Shop Wheels for 2012 Nissan GT-R
Showing 3 of 3+ wheels compatible with the 2012 Nissan GT-R
Talk to a Nissan Fitment Expert
Not sure which wheels to run on your 2012 Nissan GT-R? Our team has helped thousands of Nissan owners dial in the perfect setup. Free advice, no pressure — just call or email.
The 2012 Nissan GT-R is popular in the JDM and sport compact community. Whether you're building a weekend show car, a daily-driven street setup, or a purpose-built track machine, upgrading your wheels is the single biggest visual and performance improvement you can make. At ThreePiece, we carry thousands of aftermarket wheels that are verified to bolt directly onto your 2012 Nissan GT-R — no guesswork, no adapters, no fitment surprises.
Every wheel we sell for the GT-R has been cross-referenced against the factory 5x114.3 bolt pattern and 66.1mm hub bore, and we stock both square and staggered setups. The factory runs 20x9.5 front / 20x10.5 rear, but many owners go wider and lower offset for a more aggressive stance. All orders ship free within the continental US, and our fitment team is available by phone to walk you through every option.
2012 Nissan GT-R Trim Levels
The 2012 Nissan GT-R was offered in 2 trims. The bolt pattern, center bore, and lug specifications are shared across all trims — differences are primarily in stock wheel diameter and offset. The fitment data below covers all variants.
2012 Nissan GT-R Wheel Fitment Specifications
These are the critical numbers you need when shopping for aftermarket wheels for the 2012 Nissan GT-R. The 5x114.3 bolt pattern determines which wheels physically bolt onto your car, while the 66.1mm center bore ensures a hub-centric fit. This car runs a staggered wheel setup from the factory: 20x9.5 +45 up front and 20x10.5 +25 in the rear, giving it a wider rear track for improved traction and a more aggressive stance. This vehicle is equipped with TPMS (tire pressure monitoring sensors) — make sure any new wheels you purchase are TPMS-compatible, or pick up a rebuild kit from our installation accessories page.
2012 Nissan GT-R Compatible Wheel Sizes — Rear Axle
Rear axle wheel options for the staggered 2012 Nissan GT-R. The rear wheels are typically wider than the fronts with a lower (or even negative) offset, pushing the wheel closer to flush with the fender. Popular rear setups pair a wide wheel with a stretched or meaty tire depending on whether you're going for a street look or track grip.
| Wheel Size | Offset Range | Compatible Tires | Notes |
|---|---|---|---|
| 20x10 | +10 to +25 | 285/35R20 | — |
| 20x10 | +10 to +25 | 285/35R20, 275/35R20 | — |
| 20x10.5 | +10 to +25 | 285/35R20 | — |
| 21x10.5 | +10 to +25 | 285/35R21 | — |
| 20x11 | +10 to +20 | 285/35R20 | — |
| 20x11.5 | +10 to +30 | 285/35R20 | — |
| 21x11.5 | +10 to +25 | 285/35R21 | — |
Best Wheel Brands for the Nissan GT-R
The Nissan GT-R is popular in the JDM and sport compact community. Based on what we see our customers running and what the community gravitates toward, here are the brands we recommend for the GT-R:
- Work Wheels — Meister, Emotion, Equip, CR Kiwami
- Volk Racing — TE37, CE28, ZE40
- SSR — Professor, Formula, GTX
- Gram Lights — 57CR, 57DR, 57Xtreme
- Enkei — RPF1, NT03, PF01
- Aodhan — DS02, AH02, AFF7
- WedsSport — SA-72R, TC105X
Don't see the brand you're looking for? Browse all brands or call us — we can source wheels from virtually any manufacturer.
Complete Your 2012 Nissan GT-R Build
Wheels are just the beginning. Many GT-R owners pair their wheel upgrade with performance modifications to get the most out of their car. Here are some popular upgrades that complement a new set of wheels:
- Nissan GT-R coilovers — often paired with a wheel upgrade for a complete transformation
- Nissan GT-R exhaust systems — often paired with a wheel upgrade for a complete transformation
- Nissan GT-R suspension — often paired with a wheel upgrade for a complete transformation
- Nissan GT-R brakes — often paired with a wheel upgrade for a complete transformation
- Wheel & tire packages — save time and money with a pre-mounted, balanced package shipped ready to bolt on
- Installation accessories — hub-centric rings, extended lug studs, TPMS rebuild kits, wheel spacers
Understanding 2012 Nissan GT-R Wheel Fitment
Getting the right wheel fitment on your 2012 Nissan GT-R comes down to four critical measurements:
Bolt Pattern: 5x114.3
The bolt pattern (also called PCD) is the most fundamental fitment spec — it determines which wheels will physically bolt onto your car. The 2012 Nissan GT-R uses a 5x114.3 pattern, which is shared with many other Nissan models and is one of the most common bolt patterns in the JDM world. This means you have a massive selection of aftermarket wheels to choose from.
Center Bore: 66.1mm
The center bore is the hole in the middle of the wheel that sits over your hub. The 2012 Nissan GT-R has a 66.1mm center bore. If your aftermarket wheels have a larger bore (which is common), you'll need hub-centric rings to eliminate vibration at highway speeds. We include the correct hub rings with every wheel and tire package.
Offset & Width
Offset determines how far the wheel sits inward or outward relative to the hub face. A lower offset pushes the wheel outward for a more aggressive, flush look. A higher offset tucks the wheel further under the fender for a conservative fitment. The 2012 Nissan GT-R runs a staggered offset from the factory: +45 front and +25 rear. Most aftermarket staggered setups run 5-15mm lower offset than stock for a flush or slightly aggressive stance.
TPMS Compatibility
The 2012 Nissan GT-Ris equipped with tire pressure monitoring sensors. When switching to aftermarket wheels, you'll either need wheels with enough clearance for your existing sensors, or a TPMS rebuild kitwith new valve stems. Our team can help you determine the best approach based on the specific wheels you're considering.
Related Articles
Read more about the Nissan GT-R and wheel fitment on our blog:
Ready to Upgrade Your 2012 Nissan GT-R?
Browse our full catalog, get a wheel and tire package quote, or talk to a fitment expert.
Other Nissan GT-R Years
Other Nissan Models
Frequently Asked Questions — 2012 Nissan GT-R Wheels
What bolt pattern does a 2012 Nissan GT-R have?
The 2012 Nissan GT-R uses a 5x114.3 bolt pattern with a 66.1mm center bore. This is one of the most common patterns in the aftermarket, giving you access to thousands of wheel options.
Does the 2012 Nissan GT-R come with staggered wheels?
Yes — the 2012 Nissan GT-R runs a factory staggered setup: 20x9.5 front with +45 offset and 20x10.5 rear with +25 offset. You can maintain a staggered setup with aftermarket wheels or go square (same size all around) depending on your goals.
What size wheels can I put on my 2012 Nissan GT-R?
See the plus-size guide above for all confirmed compatible sizes.
Do you offer free shipping on 2012 Nissan GT-R wheels?
Yes — every wheel and wheel & tire package ships free within the continental United States. We also offer professional mounting, balancing, and TPMS sensor installation on all packages.
What brands make wheels for the 2012 Nissan GT-R?
We carry wheels from Work Wheels, Volk Racing, SSR, Gram Lights, and many more. Browse all brands or call us for a personalized recommendation.