2016 Bmw 428I Wheels & Rims
Shop Wheels for 2016 Bmw 428I
Showing 24 of 56+ wheels compatible with the 2016 Bmw 428I
KATANA RACING
18x8
$215.00/ea
Heritage Wheel
20x9
$459.00/ea
Heritage Wheel
18x8.5
$339.00/ea
Heritage Wheel
18x8.5
$339.00/ea
Heritage Wheel
19x9.5
$359.00/ea
Heritage Wheel
18x8.5
$339.00/ea
Heritage Wheel
18x8.5
$399.00/ea
Heritage Wheel
20x9
$359.00/ea
Heritage Wheel
18x8.5
$339.00/ea
TSW
17x8
$224.00/ea
Aodhan
19x8.5
$299.75/ea
Petrol
19x8
$322.00/ea
Performance Replicas
20x9
$383.00/ea
Aodhan
18x8.5
$249.75/ea
Work Wheels
17x9
$513.00/ea
Niche 1PC
20x9
$517.00/ea
OHM
20x10
$360.00/ea
Aodhan
19x9.5
$299.75/ea
Work Wheels
18x9.5
$551.00/ea
Niche 1PC
19x8.5
$420.00/ea
Aodhan
18x8.5
$274.75/ea
Rohana Wheels
20x10
$758.00/ea
Niche 1PC
20x9
$490.00/ea
Petrol
18x8
$225.00/ea
Talk to a Bmw Fitment Expert
Not sure which wheels to run on your 2016 Bmw 428I? Our team has helped thousands of Bmw owners dial in the perfect setup. Free advice, no pressure — just call or email.
The 2016 Bmw 428I is a favorite among European car enthusiasts. Whether you're building a weekend show car, a daily-driven street setup, or a purpose-built track machine, upgrading your wheels is the single biggest visual and performance improvement you can make. At ThreePiece, we carry thousands of aftermarket wheels that are verified to bolt directly onto your 2016 Bmw 428I — no guesswork, no adapters, no fitment surprises.
Every wheel we sell for the 428I has been cross-referenced against the factory 5x120 bolt pattern and 72.6mm hub bore. The stock wheel is a 17x7.5, but owners commonly upgrade to larger diameters for improved aesthetics and handling. All orders ship free within the continental US, and our fitment team is available by phone to walk you through every option.
2016 Bmw 428I Trim Levels
The 2016 Bmw 428I was offered in 1 trim. The bolt pattern, center bore, and lug specifications are shared across all trims — differences are primarily in stock wheel diameter and offset. The fitment data below covers all variants.
2016 Bmw 428I Wheel Fitment Specifications
These are the critical numbers you need when shopping for aftermarket wheels for the 2016 Bmw 428I. The 5x120 bolt pattern determines which wheels physically bolt onto your car, while the 72.6mm center bore ensures a hub-centric fit. The factory equips this car with 17x7.5 wheels at a +37 offset. This vehicle is equipped with TPMS (tire pressure monitoring sensors) — make sure any new wheels you purchase are TPMS-compatible, or pick up a rebuild kit from our installation accessories page.
2016 Bmw 428I Compatible Wheel Sizes
Every wheel size in this table has been verified as compatible with the 2016 Bmw 428I. The table includes both OEM-equivalent replacement sizes and popular plus-size upgrades. When upsizing, remember that a lower-profile tire is needed to maintain the same overall diameter and keep your speedometer accurate.
| Wheel Size | Offset Range | Compatible Tires | Notes |
|---|---|---|---|
| 17x7 | +20 to +40 | 225/50R17 | — |
| 17x7.5 | +30 to +40 | 225/50R17 | — |
| 18x7.5 | +30 to +40 | 225/45R18 | — |
| 19x7.5 | +30 to +40 | 225/40R19 | — |
| 17x8 | +30 to +40 | 225/50R17 | — |
| 18x8 | +30 to +40 | 225/45R18 | — |
| 19x8 | +30 to +40 | 225/40R19 | — |
| 20x8 | +32 to +40 | 225/35R20 | — |
| 18x8.5 | +32 to +40 | 225/45R18 | — |
| 19x8.5 | +30 to +40 | 225/40R19 | — |
| 20x8.5 | +32 to +40 | 225/35R20 | — |
Best Wheel Brands for the Bmw 428I
The Bmw 428I is a favorite among European car enthusiasts. Based on what we see our customers running and what the community gravitates toward, here are the brands we recommend for the 428I:
- BBS — LM, RS, FI, CI-R
- Volk Racing — TE37, ZE40
- Work Wheels — Meister, Emotion
- TSW — Bathurst, Nurburgring
- Rotiform — FLG, OZR, BUC
- Enkei — RPF1, TS-V
Don't see the brand you're looking for? Browse all brands or call us — we can source wheels from virtually any manufacturer.
Complete Your 2016 Bmw 428I Build
Wheels are just the beginning. Many 428I owners pair their wheel upgrade with performance modifications to get the most out of their car. Here are some popular upgrades that complement a new set of wheels:
- Bmw 428I coilovers — often paired with a wheel upgrade for a complete transformation
- Bmw 428I exhaust systems — often paired with a wheel upgrade for a complete transformation
- Bmw 428I suspension — often paired with a wheel upgrade for a complete transformation
- Bmw 428I brakes — often paired with a wheel upgrade for a complete transformation
- Wheel & tire packages — save time and money with a pre-mounted, balanced package shipped ready to bolt on
- Installation accessories — hub-centric rings, extended lug studs, TPMS rebuild kits, wheel spacers
Understanding 2016 Bmw 428I Wheel Fitment
Getting the right wheel fitment on your 2016 Bmw 428I comes down to four critical measurements:
Bolt Pattern: 5x120
The bolt pattern (also called PCD) is the most fundamental fitment spec — it determines which wheels will physically bolt onto your car. The 2016 Bmw 428I uses a 5x120 pattern, which is shared with many other Bmw models. This means you have a massive selection of aftermarket wheels to choose from.
Center Bore: 72.6mm
The center bore is the hole in the middle of the wheel that sits over your hub. The 2016 Bmw 428I has a 72.6mm center bore. If your aftermarket wheels have a larger bore (which is common), you'll need hub-centric rings to eliminate vibration at highway speeds. We include the correct hub rings with every wheel and tire package.
Offset & Width
Offset determines how far the wheel sits inward or outward relative to the hub face. A lower offset pushes the wheel outward for a more aggressive, flush look. A higher offset tucks the wheel further under the fender for a conservative fitment. The factory offset of +37 is a good baseline — going 5-15mm lower will give you a more flush look.
TPMS Compatibility
The 2016 Bmw 428Iis equipped with tire pressure monitoring sensors. When switching to aftermarket wheels, you'll either need wheels with enough clearance for your existing sensors, or a TPMS rebuild kitwith new valve stems. Our team can help you determine the best approach based on the specific wheels you're considering.
Related Articles
Read more about the Bmw 428I and wheel fitment on our blog:
Ready to Upgrade Your 2016 Bmw 428I?
Browse our full catalog, get a wheel and tire package quote, or talk to a fitment expert.
Other Bmw 428I Years
Other Bmw Models
Frequently Asked Questions — 2016 Bmw 428I Wheels
What bolt pattern does a 2016 Bmw 428I have?
The 2016 Bmw 428I uses a 5x120 bolt pattern with a 72.6mm center bore. This is one of the most common patterns in the aftermarket, giving you access to thousands of wheel options.
What size wheels can I put on my 2016 Bmw 428I?
Compatible wheel sizes for the 2016 Bmw 428I range from 17x7 up to 20x8.5 on the front and rear. See the complete compatibility tables above for every confirmed size, offset range, and tire pairing.
Do you offer free shipping on 2016 Bmw 428I wheels?
Yes — every wheel and wheel & tire package ships free within the continental United States. We also offer professional mounting, balancing, and TPMS sensor installation on all packages.
What brands make wheels for the 2016 Bmw 428I?
We carry wheels from BBS, Volk Racing, Work Wheels, TSW, and many more. Browse all brands or call us for a personalized recommendation.