2020 Porsche Taycan Wheels & Rims

Shop Wheels for 2020 Porsche Taycan

The 2020 Porsche Taycan is a favorite among European car enthusiasts. Whether you're building a weekend show car, a daily-driven street setup, or a purpose-built track machine, upgrading your wheels is the single biggest visual and performance improvement you can make. At ThreePiece, we carry thousands of aftermarket wheels that are verified to bolt directly onto your 2020 Porsche Taycan — no guesswork, no adapters, no fitment surprises.

Every wheel we sell for the Taycan has been cross-referenced against the factory 5x130 bolt pattern and 71.6mm hub bore, and we stock both square and staggered setups. The factory runs 19x8 front / 19x10 rear, but many owners go wider and lower offset for a more aggressive stance. All orders ship free within the continental US, and our fitment team is available by phone to walk you through every option.

2020 Porsche Taycan Trim Levels

The 2020 Porsche Taycan was offered in 3 trims. The bolt pattern, center bore, and lug specifications are shared across all trims — differences are primarily in stock wheel diameter and offset. The fitment data below covers all variants.

2020 Porsche Taycan Wheel Fitment Specifications

These are the critical numbers you need when shopping for aftermarket wheels for the 2020 Porsche Taycan. The 5x130 bolt pattern determines which wheels physically bolt onto your car, while the 71.6mm center bore ensures a hub-centric fit. This car runs a staggered wheel setup from the factory: 19x8 +50 up front and 19x10 +47 in the rear, giving it a wider rear track for improved traction and a more aggressive stance. This vehicle is equipped with TPMS (tire pressure monitoring sensors) — make sure any new wheels you purchase are TPMS-compatible, or pick up a rebuild kit from our installation accessories page.

2020 Porsche Taycan Compatible Wheel Sizes — Front Axle

These are the confirmed front axle wheel sizes for the 2020 Porsche Taycan. For a staggered setup, pair these with a wider rear wheel from the rear compatibility table below. Going up in diameter typically improves looks and turn-in response, while going wider improves grip — just make sure your chosen offset keeps the wheel within the fender.

2020 Porsche Taycan Compatible Wheel Sizes — Rear Axle

Rear axle wheel options for the staggered 2020 Porsche Taycan. The rear wheels are typically wider than the fronts with a lower (or even negative) offset, pushing the wheel closer to flush with the fender. Popular rear setups pair a wide wheel with a stretched or meaty tire depending on whether you're going for a street look or track grip.

Best Wheel Brands for the Porsche Taycan

The Porsche Taycan is a favorite among European car enthusiasts. Based on what we see our customers running and what the community gravitates toward, here are the brands we recommend for the Taycan:

• BBS — LM, RS, FI, CI-R
• Volk Racing — TE37, ZE40
• Work Wheels — Meister, Emotion
• TSW — Bathurst, Nurburgring
• Rotiform — FLG, OZR, BUC
• Enkei — RPF1, TS-V

Don't see the brand you're looking for? Browse all brands or call us — we can source wheels from virtually any manufacturer.

Complete Your 2020 Porsche Taycan Build

Wheels are just the beginning. Many Taycan owners pair their wheel upgrade with performance modifications to get the most out of their car. Here are some popular upgrades that complement a new set of wheels:

• Porsche Taycan coilovers — often paired with a wheel upgrade for a complete transformation
• Porsche Taycan exhaust systems — often paired with a wheel upgrade for a complete transformation
• Porsche Taycan suspension — often paired with a wheel upgrade for a complete transformation
• Porsche Taycan brakes — often paired with a wheel upgrade for a complete transformation
• Wheel & tire packages — save time and money with a pre-mounted, balanced package shipped ready to bolt on
• Installation accessories — hub-centric rings, extended lug studs, TPMS rebuild kits, wheel spacers

Understanding 2020 Porsche Taycan Wheel Fitment

Getting the right wheel fitment on your 2020 Porsche Taycan comes down to four critical measurements:

Bolt Pattern: 5x130

The bolt pattern (also called PCD) is the most fundamental fitment spec — it determines which wheels will physically bolt onto your car. The 2020 Porsche Taycan uses a 5x130 pattern, which is shared with many other Porsche models. This means you have a massive selection of aftermarket wheels to choose from.

Center Bore: 71.6mm

The center bore is the hole in the middle of the wheel that sits over your hub. The 2020 Porsche Taycan has a 71.6mm center bore. If your aftermarket wheels have a larger bore (which is common), you'll need hub-centric rings to eliminate vibration at highway speeds. We include the correct hub rings with every wheel and tire package.

Offset & Width

Offset determines how far the wheel sits inward or outward relative to the hub face. A lower offset pushes the wheel outward for a more aggressive, flush look. A higher offset tucks the wheel further under the fender for a conservative fitment. The 2020 Porsche Taycan runs a staggered offset from the factory: +50 front and +47 rear. Most aftermarket staggered setups run 5-15mm lower offset than stock for a flush or slightly aggressive stance.

TPMS Compatibility

The 2020 Porsche Taycanis equipped with tire pressure monitoring sensors. When switching to aftermarket wheels, you'll either need wheels with enough clearance for your existing sensors, or a TPMS rebuild kitwith new valve stems. Our team can help you determine the best approach based on the specific wheels you're considering.

Related Articles

Read more about the Porsche Taycan and wheel fitment on our blog:

• Wheel Alignment Settings That Save Your Tires: Camber, Toe & Caster Guide
• Browse all articles →

Other Porsche Taycan Years

Other Porsche Models

Frequently Asked Questions — 2020 Porsche Taycan Wheels