2020 Polestar Polestar 1 Wheels & Rims

Shop Wheels for 2020 Polestar Polestar 1

The 2020 Polestar Polestar 1 is a popular platform for wheel upgrades. Whether you're building a weekend show vehicle, a daily-driven street setup, or a purpose-built track machine, upgrading your wheels is the single biggest visual and performance improvement you can make. At ThreePiece, we carry thousands of aftermarket wheels that are verified to bolt directly onto your 2020 Polestar Polestar 1 — no guesswork, no adapters, no fitment surprises.

Every wheel we sell for the Polestar 1 has been cross-referenced against the factory 5x108 bolt pattern and 63.4mm hub bore, and we stock both square and staggered setups. The factory runs 21x9 front / 21x10 rear, but many owners go wider and lower offset for a more aggressive stance. All orders ship free within the continental US, and our fitment team is available by phone to walk you through every option.

2020 Polestar Polestar 1 Trim Levels

The 2020 Polestar Polestar 1 was offered in 1 trim. The bolt pattern, center bore, and lug specifications are shared across all trims — differences are primarily in stock wheel diameter and offset. The fitment data below covers all variants.

2020 Polestar Polestar 1 Wheel Fitment Specifications

These are the critical numbers you need when shopping for aftermarket wheels for the 2020 Polestar Polestar 1. The 5x108 bolt pattern determines which wheels physically bolt onto your vehicle, while the 63.4mm center bore ensures a hub-centric fit. This vehicle runs a staggered wheel setup from the factory: 21x9 +35 up front and 21x10 +30 in the rear, giving it a wider rear track for improved traction and a more aggressive stance. This vehicle is equipped with TPMS (tire pressure monitoring sensors) — make sure any new wheels you purchase are TPMS-compatible, or pick up a rebuild kit from our installation accessories page.

2020 Polestar Polestar 1 Compatible Wheel Sizes — Rear Axle

Rear axle wheel options for the staggered 2020 Polestar Polestar 1. The rear wheels are typically wider than the fronts with a lower (or even negative) offset, pushing the wheel closer to flush with the fender. Popular rear setups pair a wide wheel with a stretched or meaty tire depending on whether you're going for a street look or track grip.

Best Wheel Brands for the Polestar Polestar 1

The Polestar Polestar 1 is a popular platform for wheel upgrades. Based on what we see our customers running and what the community gravitates toward, here are the brands we recommend for the Polestar 1:

• Work Wheels
• Volk Racing
• SSR
• Enkei
• Heritage Wheel
• BBS

Don't see the brand you're looking for? Browse all brands or call us — we can source wheels from virtually any manufacturer.

Complete Your 2020 Polestar Polestar 1 Build

Wheels are just the beginning. Many Polestar 1 owners pair their wheel upgrade with performance modifications to get the most out of their vehicle. Here are some popular upgrades that complement a new set of wheels:

• Polestar Polestar 1 suspension — often paired with a wheel upgrade for a complete transformation
• Polestar Polestar 1 brakes — often paired with a wheel upgrade for a complete transformation
• Wheel & tire packages — save time and money with a pre-mounted, balanced package shipped ready to bolt on
• Installation accessories — hub-centric rings, extended lug studs, TPMS rebuild kits, wheel spacers

Understanding 2020 Polestar Polestar 1 Wheel Fitment

Getting the right wheel fitment on your 2020 Polestar Polestar 1 comes down to four critical measurements:

Bolt Pattern: 5x108

The bolt pattern (also called PCD) is the most fundamental fitment spec — it determines which wheels will physically bolt onto your vehicle. The 2020 Polestar Polestar 1 uses a 5x108 pattern, which is shared with many other Polestar models. This means you have a massive selection of aftermarket wheels to choose from.

Center Bore: 63.4mm

The center bore is the hole in the middle of the wheel that sits over your hub. The 2020 Polestar Polestar 1 has a 63.4mm center bore. If your aftermarket wheels have a larger bore (which is common), you'll need hub-centric rings to eliminate vibration at highway speeds. We include the correct hub rings with every wheel and tire package.

Offset & Width

Offset determines how far the wheel sits inward or outward relative to the hub face. A lower offset pushes the wheel outward for a more aggressive, flush look. A higher offset tucks the wheel further under the fender for a conservative fitment. The 2020 Polestar Polestar 1 runs a staggered offset from the factory: +35 front and +30 rear. Most aftermarket staggered setups run 5-15mm lower offset than stock for a flush or slightly aggressive stance.

TPMS Compatibility

The 2020 Polestar Polestar 1is equipped with tire pressure monitoring sensors. When switching to aftermarket wheels, you'll either need wheels with enough clearance for your existing sensors, or a TPMS rebuild kitwith new valve stems. Our team can help you determine the best approach based on the specific wheels you're considering.

Related Articles

Read more about the Polestar Polestar 1 and wheel fitment on our blog:

• Wheel Alignment Settings That Save Your Tires: Camber, Toe & Caster Guide
• Browse all articles →

Other Polestar Polestar 1 Years

Other Polestar Models

Frequently Asked Questions — 2020 Polestar Polestar 1 Wheels