1983 Fiat 124 Wheels & Rims
Shop Wheels for 1983 Fiat 124
Talk to a Fiat Fitment Expert
Not sure which wheels to run on your 1983 Fiat 124? Our team has helped thousands of Fiat owners dial in the perfect setup. Free advice, no pressure — just call or email.
The 1983 Fiat 124 is a favorite among European car enthusiasts. Whether you're building a weekend show car, a daily-driven street setup, or a purpose-built track machine, upgrading your wheels is the single biggest visual and performance improvement you can make. At ThreePiece, we carry thousands of aftermarket wheels that are verified to bolt directly onto your 1983 Fiat 124 — no guesswork, no adapters, no fitment surprises.
Every wheel we sell for the 124 has been cross-referenced against the factory 4x98 bolt pattern and 58.6mm hub bore. The stock wheel is a 13x4, but owners commonly upgrade to larger diameters for improved aesthetics and handling. All orders ship free within the continental US, and our fitment team is available by phone to walk you through every option.
1983 Fiat 124 Trim Levels
The 1983 Fiat 124 was offered in 1 trim. The bolt pattern, center bore, and lug specifications are shared across all trims — differences are primarily in stock wheel diameter and offset. The fitment data below covers all variants.
1983 Fiat 124 Wheel Fitment Specifications
These are the critical numbers you need when shopping for aftermarket wheels for the 1983 Fiat 124. The 4x98 bolt pattern determines which wheels physically bolt onto your car, while the 58.6mm center bore ensures a hub-centric fit. The factory equips this car with 13x4 wheels at a +36 offset.
1983 Fiat 124 Compatible Wheel Sizes
Every wheel size in this table has been verified as compatible with the 1983 Fiat 124. The table includes both OEM-equivalent replacement sizes and popular plus-size upgrades. When upsizing, remember that a lower-profile tire is needed to maintain the same overall diameter and keep your speedometer accurate.
| Wheel Size | Offset Range | Compatible Tires | Notes |
|---|---|---|---|
| 13x4 | +25 to +36 | 135/80R13, 155/70R13, 145/80R13 | 1. Check fitment, possible clearance issues |
| 13x4.5 | +25 to +35 | 135/80R13, 155/70R13, 165/65R13 | 1. Check fitment, possible clearance issues |
| 13x5 | +25 to +36 | 155/70R13, 165/65R13, 145/80R13 | 1. Check fitment, possible clearance issues |
| 13x5.5 | +25 to +35 | 155/70R13, 165/65R13, 145/80R13 | 1. Check fitment, possible clearance issues |
Best Wheel Brands for the Fiat 124
The Fiat 124 is a favorite among European car enthusiasts. Based on what we see our customers running and what the community gravitates toward, here are the brands we recommend for the 124:
- BBS — LM, RS, FI, CI-R
- Volk Racing — TE37, ZE40
- Work Wheels — Meister, Emotion
- TSW — Bathurst, Nurburgring
- Rotiform — FLG, OZR, BUC
- Enkei — RPF1, TS-V
Don't see the brand you're looking for? Browse all brands or call us — we can source wheels from virtually any manufacturer.
Complete Your 1983 Fiat 124 Build
Wheels are just the beginning. Many 124 owners pair their wheel upgrade with performance modifications to get the most out of their car. Here are some popular upgrades that complement a new set of wheels:
- Fiat 124 coilovers — often paired with a wheel upgrade for a complete transformation
- Fiat 124 exhaust systems — often paired with a wheel upgrade for a complete transformation
- Fiat 124 suspension — often paired with a wheel upgrade for a complete transformation
- Fiat 124 brakes — often paired with a wheel upgrade for a complete transformation
- Wheel & tire packages — save time and money with a pre-mounted, balanced package shipped ready to bolt on
- Installation accessories — hub-centric rings, extended lug studs, TPMS rebuild kits, wheel spacers
Understanding 1983 Fiat 124 Wheel Fitment
Getting the right wheel fitment on your 1983 Fiat 124 comes down to four critical measurements:
Bolt Pattern: 4x98
The bolt pattern (also called PCD) is the most fundamental fitment spec — it determines which wheels will physically bolt onto your car. The 1983 Fiat 124 uses a 4x98 pattern, which is shared with many other Fiat models. This means you have a massive selection of aftermarket wheels to choose from.
Center Bore: 58.6mm
The center bore is the hole in the middle of the wheel that sits over your hub. The 1983 Fiat 124 has a 58.6mm center bore. If your aftermarket wheels have a larger bore (which is common), you'll need hub-centric rings to eliminate vibration at highway speeds. We include the correct hub rings with every wheel and tire package.
Offset & Width
Offset determines how far the wheel sits inward or outward relative to the hub face. A lower offset pushes the wheel outward for a more aggressive, flush look. A higher offset tucks the wheel further under the fender for a conservative fitment. The factory offset of +36 is a good baseline — going 5-15mm lower will give you a more flush look.
Related Articles
Read more about the Fiat 124 and wheel fitment on our blog:
Ready to Upgrade Your 1983 Fiat 124?
Browse our full catalog, get a wheel and tire package quote, or talk to a fitment expert.
Other Fiat 124 Years
Other Fiat Models
Frequently Asked Questions — 1983 Fiat 124 Wheels
What bolt pattern does a 1983 Fiat 124 have?
The 1983 Fiat 124 uses a 4x98 bolt pattern with a 58.6mm center bore. This is one of the most common patterns in the aftermarket, giving you access to thousands of wheel options.
What size wheels can I put on my 1983 Fiat 124?
Compatible wheel sizes for the 1983 Fiat 124 range from 13x4 up to 13x5.5 on the front and rear. See the complete compatibility tables above for every confirmed size, offset range, and tire pairing.
Do you offer free shipping on 1983 Fiat 124 wheels?
Yes — every wheel and wheel & tire package ships free within the continental United States. We also offer professional mounting, balancing, and TPMS sensor installation on all packages.
What brands make wheels for the 1983 Fiat 124?
We carry wheels from BBS, Volk Racing, Work Wheels, TSW, and many more. Browse all brands or call us for a personalized recommendation.