2023 Ferrari 296 gtb Wheels & Rims
Shop Wheels for 2023 Ferrari 296 gtb
Showing 3 of 3+ wheels compatible with the 2023 Ferrari 296 gtb
Talk to a Ferrari Fitment Expert
Not sure which wheels to run on your 2023 Ferrari 296 gtb? Our team has helped thousands of Ferrari owners dial in the perfect setup. Free advice, no pressure — just call or email.
The 2023 Ferrari 296 gtb is a popular platform for wheel upgrades. Whether you're building a weekend show vehicle, a daily-driven street setup, or a purpose-built track machine, upgrading your wheels is the single biggest visual and performance improvement you can make. At ThreePiece, we carry thousands of aftermarket wheels that are verified to bolt directly onto your 2023 Ferrari 296 gtb — no guesswork, no adapters, no fitment surprises.
Every wheel we sell for the 296 gtb has been cross-referenced against the factory 5x114.3 bolt pattern and 67.1mm hub bore, and we stock both square and staggered setups. The factory runs 20x9 front / 20x11 rear, but many owners go wider and lower offset for a more aggressive stance. All orders ship free within the continental US, and our fitment team is available by phone to walk you through every option.
2023 Ferrari 296 gtb Trim Levels
The 2023 Ferrari 296 gtb was offered in 1 trim. The bolt pattern, center bore, and lug specifications are shared across all trims — differences are primarily in stock wheel diameter and offset. The fitment data below covers all variants.
2023 Ferrari 296 gtb Wheel Fitment Specifications
These are the critical numbers you need when shopping for aftermarket wheels for the 2023 Ferrari 296 gtb. The 5x114.3 bolt pattern determines which wheels physically bolt onto your vehicle, while the 67.1mm center bore ensures a hub-centric fit. This vehicle runs a staggered wheel setup from the factory: 20x9 +44 up front and 20x11 +38 in the rear, giving it a wider rear track for improved traction and a more aggressive stance. This vehicle is equipped with TPMS (tire pressure monitoring sensors) — make sure any new wheels you purchase are TPMS-compatible, or pick up a rebuild kit from our installation accessories page.
2023 Ferrari 296 gtb Compatible Wheel Sizes — Rear Axle
Rear axle wheel options for the staggered 2023 Ferrari 296 gtb. The rear wheels are typically wider than the fronts with a lower (or even negative) offset, pushing the wheel closer to flush with the fender. Popular rear setups pair a wide wheel with a stretched or meaty tire depending on whether you're going for a street look or track grip.
| Wheel Size | Offset Range | Compatible Tires | Notes |
|---|---|---|---|
| 20x11 | +35 to +40 | 305/35R20 | — |
| 21x11 | +29 to +30 | 315/30R21, 315/25R21 | 15. Follow The Specific NotesExtreme fitment, consult your supplier |
| 22x11.5 | +29 to +30 | 335/25R22 | 15. Follow The Specific NotesExtreme fitment, consult your supplier |
Best Wheel Brands for the Ferrari 296 gtb
The Ferrari 296 gtb is a popular platform for wheel upgrades. Based on what we see our customers running and what the community gravitates toward, here are the brands we recommend for the 296 gtb:
Don't see the brand you're looking for? Browse all brands or call us — we can source wheels from virtually any manufacturer.
Complete Your 2023 Ferrari 296 gtb Build
Wheels are just the beginning. Many 296 gtb owners pair their wheel upgrade with performance modifications to get the most out of their vehicle. Here are some popular upgrades that complement a new set of wheels:
- Ferrari 296 gtb suspension — often paired with a wheel upgrade for a complete transformation
- Ferrari 296 gtb brakes — often paired with a wheel upgrade for a complete transformation
- Wheel & tire packages — save time and money with a pre-mounted, balanced package shipped ready to bolt on
- Installation accessories — hub-centric rings, extended lug studs, TPMS rebuild kits, wheel spacers
Understanding 2023 Ferrari 296 gtb Wheel Fitment
Getting the right wheel fitment on your 2023 Ferrari 296 gtb comes down to four critical measurements:
Bolt Pattern: 5x114.3
The bolt pattern (also called PCD) is the most fundamental fitment spec — it determines which wheels will physically bolt onto your vehicle. The 2023 Ferrari 296 gtb uses a 5x114.3 pattern, which is shared with many other Ferrari models. This means you have a massive selection of aftermarket wheels to choose from.
Center Bore: 67.1mm
The center bore is the hole in the middle of the wheel that sits over your hub. The 2023 Ferrari 296 gtb has a 67.1mm center bore. If your aftermarket wheels have a larger bore (which is common), you'll need hub-centric rings to eliminate vibration at highway speeds. We include the correct hub rings with every wheel and tire package.
Offset & Width
Offset determines how far the wheel sits inward or outward relative to the hub face. A lower offset pushes the wheel outward for a more aggressive, flush look. A higher offset tucks the wheel further under the fender for a conservative fitment. The 2023 Ferrari 296 gtb runs a staggered offset from the factory: +44 front and +38 rear. Most aftermarket staggered setups run 5-15mm lower offset than stock for a flush or slightly aggressive stance.
TPMS Compatibility
The 2023 Ferrari 296 gtbis equipped with tire pressure monitoring sensors. When switching to aftermarket wheels, you'll either need wheels with enough clearance for your existing sensors, or a TPMS rebuild kitwith new valve stems. Our team can help you determine the best approach based on the specific wheels you're considering.
Related Articles
Read more about the Ferrari 296 gtb and wheel fitment on our blog:
Ready to Upgrade Your 2023 Ferrari 296 gtb?
Browse our full catalog, get a wheel and tire package quote, or talk to a fitment expert.
Other Ferrari 296 gtb Years
Other Ferrari Models
Frequently Asked Questions — 2023 Ferrari 296 gtb Wheels
What bolt pattern does a 2023 Ferrari 296 gtb have?
The 2023 Ferrari 296 gtb uses a 5x114.3 bolt pattern with a 67.1mm center bore. This is one of the most common patterns in the aftermarket, giving you access to thousands of wheel options.
Does the 2023 Ferrari 296 gtb come with staggered wheels?
Yes — the 2023 Ferrari 296 gtb runs a factory staggered setup: 20x9 front with +44 offset and 20x11 rear with +38 offset. You can maintain a staggered setup with aftermarket wheels or go square (same size all around) depending on your goals.
What size wheels can I put on my 2023 Ferrari 296 gtb?
See the plus-size guide above for all confirmed compatible sizes.
Do you offer free shipping on 2023 Ferrari 296 gtb wheels?
Yes — every wheel and wheel & tire package ships free within the continental United States. We also offer professional mounting, balancing, and TPMS sensor installation on all packages.
What brands make wheels for the 2023 Ferrari 296 gtb?
We carry wheels from Work Wheels, Volk Racing, SSR, Enkei, and many more. Browse all brands or call us for a personalized recommendation.