1989 Chrysler Conquest Wheels & Rims
Shop Wheels for 1989 Chrysler Conquest
Showing 10 of 10+ wheels compatible with the 1989 Chrysler Conquest
Talk to a Chrysler Fitment Expert
Not sure which wheels to run on your 1989 Chrysler Conquest? Our team has helped thousands of Chrysler owners dial in the perfect setup. Free advice, no pressure — just call or email.
The 1989 Chrysler Conquest is a popular platform for wheel upgrades. Whether you're building a weekend show vehicle, a daily-driven street setup, or a purpose-built track machine, upgrading your wheels is the single biggest visual and performance improvement you can make. At ThreePiece, we carry thousands of aftermarket wheels that are verified to bolt directly onto your 1989 Chrysler Conquest — no guesswork, no adapters, no fitment surprises.
Every wheel we sell for the Conquest has been cross-referenced against the factory 5x114.3 bolt pattern and 67.1mm hub bore, and we stock both square and staggered setups. The factory runs 16x7 front / 16x8 rear, but many owners go wider and lower offset for a more aggressive stance. All orders ship free within the continental US, and our fitment team is available by phone to walk you through every option.
1989 Chrysler Conquest Trim Levels
The 1989 Chrysler Conquest was offered in 1 trim. The bolt pattern, center bore, and lug specifications are shared across all trims — differences are primarily in stock wheel diameter and offset. The fitment data below covers all variants.
1989 Chrysler Conquest Wheel Fitment Specifications
These are the critical numbers you need when shopping for aftermarket wheels for the 1989 Chrysler Conquest. The 5x114.3 bolt pattern determines which wheels physically bolt onto your vehicle, while the 67.1mm center bore ensures a hub-centric fit. This vehicle runs a staggered wheel setup from the factory: 16x7 +36 up front and 16x8 +30 in the rear, giving it a wider rear track for improved traction and a more aggressive stance.
1989 Chrysler Conquest Compatible Wheel Sizes — Front Axle
These are the confirmed front axle wheel sizes for the 1989 Chrysler Conquest. For a staggered setup, pair these with a wider rear wheel from the rear compatibility table below. Going up in diameter typically improves looks and turn-in response, while going wider improves grip — just make sure your chosen offset keeps the wheel within the fender.
| Wheel Size | Offset Range | Compatible Tires | Notes |
|---|---|---|---|
| 15x7 | +10 to +20 | 215/60R15 | — |
| 16x7 | +10 to +20 | 205/55R16, 225/50R16 | — |
| 17x7 | +10 to +20 | 205/50R17, 225/45R17 | — |
| 16x7.5 | +10 to +20 | 205/55R16, 225/50R16 | — |
| 17x7.5 | +10 to +20 | 205/50R17, 225/45R17 | — |
| 16x8 | +10 to +20 | 225/50R16 | — |
1989 Chrysler Conquest Compatible Wheel Sizes — Rear Axle
Rear axle wheel options for the staggered 1989 Chrysler Conquest. The rear wheels are typically wider than the fronts with a lower (or even negative) offset, pushing the wheel closer to flush with the fender. Popular rear setups pair a wide wheel with a stretched or meaty tire depending on whether you're going for a street look or track grip.
| Wheel Size | Offset Range | Compatible Tires | Notes |
|---|---|---|---|
| 16x8 | +5 to +15 | 225/50R16, 245/45R16 | — |
| 17x8 | +5 to +15 | 225/45R17 | — |
| 16x9 | +5 to +15 | 245/45R16 | — |
| 17x9 | +5 to +15 | 245/40R17 | — |
Best Wheel Brands for the Chrysler Conquest
The Chrysler Conquest is a popular platform for wheel upgrades. Based on what we see our customers running and what the community gravitates toward, here are the brands we recommend for the Conquest:
Don't see the brand you're looking for? Browse all brands or call us — we can source wheels from virtually any manufacturer.
Complete Your 1989 Chrysler Conquest Build
Wheels are just the beginning. Many Conquest owners pair their wheel upgrade with performance modifications to get the most out of their vehicle. Here are some popular upgrades that complement a new set of wheels:
- Chrysler Conquest suspension — often paired with a wheel upgrade for a complete transformation
- Chrysler Conquest brakes — often paired with a wheel upgrade for a complete transformation
- Wheel & tire packages — save time and money with a pre-mounted, balanced package shipped ready to bolt on
- Installation accessories — hub-centric rings, extended lug studs, TPMS rebuild kits, wheel spacers
Understanding 1989 Chrysler Conquest Wheel Fitment
Getting the right wheel fitment on your 1989 Chrysler Conquest comes down to four critical measurements:
Bolt Pattern: 5x114.3
The bolt pattern (also called PCD) is the most fundamental fitment spec — it determines which wheels will physically bolt onto your vehicle. The 1989 Chrysler Conquest uses a 5x114.3 pattern, which is shared with many other Chrysler models. This means you have a massive selection of aftermarket wheels to choose from.
Center Bore: 67.1mm
The center bore is the hole in the middle of the wheel that sits over your hub. The 1989 Chrysler Conquest has a 67.1mm center bore. If your aftermarket wheels have a larger bore (which is common), you'll need hub-centric rings to eliminate vibration at highway speeds. We include the correct hub rings with every wheel and tire package.
Offset & Width
Offset determines how far the wheel sits inward or outward relative to the hub face. A lower offset pushes the wheel outward for a more aggressive, flush look. A higher offset tucks the wheel further under the fender for a conservative fitment. The 1989 Chrysler Conquest runs a staggered offset from the factory: +36 front and +30 rear. Most aftermarket staggered setups run 5-15mm lower offset than stock for a flush or slightly aggressive stance.
Related Articles
Read more about the Chrysler Conquest and wheel fitment on our blog:
Ready to Upgrade Your 1989 Chrysler Conquest?
Browse our full catalog, get a wheel and tire package quote, or talk to a fitment expert.
Other Chrysler Conquest Years
Other Chrysler Models
Frequently Asked Questions — 1989 Chrysler Conquest Wheels
What bolt pattern does a 1989 Chrysler Conquest have?
The 1989 Chrysler Conquest uses a 5x114.3 bolt pattern with a 67.1mm center bore. This is one of the most common patterns in the aftermarket, giving you access to thousands of wheel options.
Does the 1989 Chrysler Conquest come with staggered wheels?
Yes — the 1989 Chrysler Conquest runs a factory staggered setup: 16x7 front with +36 offset and 16x8 rear with +30 offset. You can maintain a staggered setup with aftermarket wheels or go square (same size all around) depending on your goals.
What size wheels can I put on my 1989 Chrysler Conquest?
Compatible wheel sizes for the 1989 Chrysler Conquest range from 15x7 up to 16x8 on the front axle. See the complete compatibility tables above for every confirmed size, offset range, and tire pairing.
Do you offer free shipping on 1989 Chrysler Conquest wheels?
Yes — every wheel and wheel & tire package ships free within the continental United States. We also offer professional mounting, balancing, and TPMS sensor installation on all packages.
What brands make wheels for the 1989 Chrysler Conquest?
We carry wheels from Work Wheels, Volk Racing, SSR, Enkei, and many more. Browse all brands or call us for a personalized recommendation.